Just imagine the vast world of insects from tiny, inconspicuous ants that soclutteriously infiltrate your personal space to huge beetles you may never see. I remember going camping with my family as a kid, or spending time outside at night and it felt like you were surrounded by so many bugs that seem to be attracted towards the light. It can be quite fascinating! Bernhard used light traps to catch the bugs and study their behaviour very closely, in order to get a better understanding of what was going on.
What is a Light Trap!? A light trap is a device designed to entice in insects with the use of lights. Insects, as you know because they keep slamming into your windshield when the sun goes down in August (or whenever), are drawn to light like moths. Insects think the light is either a moon or stars — something they use to orient themselves and find their way in darkness. Scientists capitalize on this natural behavior by trapping insects with light traps. How smart this was of him to study these creatures!
For those who dont believe that these aliens were insects if you want to know more on your own here is how you can easily make a light trap at home! A fun DIY project for the whole family. You need few things to make your own light trap. To do it, take your flashlight or lamp you want to make shiny; a shallow container and something sticky. A small plastic container you can eat out of
Line the container with a sticky substance, such as vaseline or double sided tape so that when insects crawl into it they cannot get back out. This will make sure any bugs that come in the container get caught. Then, set your light directly above the container —this should be at minimum a few feet high (the higher it is the farther down onto the can). After you set it up, turn on the light and wait for these insects to arrive. When they fly down the light source, instead of being able to fly away because they are trapped in a sticky layer inside the container. Kind of like your own backyard experiment!
Scientists use light traps for many purposes, primarily to monitor insect abundance in time and space. Light traps catch insects of different types, and from these Light traps scientists can count the number of individual specimens to get an idea how many each type are found in that area before they morot away. Which gives scientists valuable information to better understanding our world, the nature, environment and ecosystems evolution across time.
Light pollution is another subject scientists study with light traps. Light pollution refers to the presence of excessive artificial light during night hours. Research suggests this additional light may interfere with some insecta¿s natural functions including when they breed and hunt for food, to migrate from place to another. By using light traps scientists can see how light pollution affects these insects. For instance, if a light trap near an urban area were to snag less insects than the same type of trap in a rural environment more still, that might be indicating how poorer is impact by this specific form of environmental pollution.
Beyond scientific study of insects, farmers can deploy light traps in search for pests that attack their crops as well. Farmers can employ light traps to lure the pests that are destroying their crops. This information is extremely important because it allows farmers to situate when and how they should provide a response for these pests in order save their crops. Still, light traps come with limitations of their own. For example, a different species of space invader prefers yellow-light. Furthermore, while light traps can catch flying insects (not caterpillars and the like) they may not detect them.
Our company owns a modern light trap, precise computer control High automation, high production efficiency, and the output cooling pad features uniform corrugation, high strength structural and a good absorption of water. The corrugated paper is specially treated to give it high quality and strength, as well as resistance to corrosion. It also resists mildew. Water absorption and permeability are excellent, no water drift, will guarantee that water flows evenly across the entire cooling pad. The stereoscopic design is specific and provides the biggest evaporation surface for the heat exchange between water and air, the efficiency of evaporation is high. Safety as well as energy efficiency and environmental protection, it is also economical and practical. Standard production, 600mm wide cooling pad requires an 86-sheet frame. Frames made of aluminum frames, stainless steel frames, galvanized sheet frame, and PVC frame are optional
Shandong Yuyun Sanhe Machinery Co. We are the nation's leading manufacturer of equipment for ventilation. Our manufacturing equipment is controlled digitally and we insist that each error is less than 0.03mm so that we can guarantee the complete interchangeability of our products. We make 95% of our own parts which lowers the cost of production, ensures product quality and leads the way in cost-performance. Our super design team is comprised of more than 20 professionals with over light trap of design and manufacturing expertise. To ensure that there are no defects All products have been improved at every stage of production, from drawing to the production, from the production to a drawing, and finally by making improvements to the drawing, we can move onto mass production. We have the professional sales staff that is able to plan the purchase scheme for customers, reduce transportation costs, and improve customer profit margins. A perfect after-sales service system gives our customers peace of mind. concerns.
light trap the fan plates are made from hot dip galvanized sheets with 275g/m2 that we purchase directly from "Shougang group" the most well-known Chinese steel manufacturer. This not only guarantees the quality of our products, but also reduces manufacturing costs. Mitsuboshi belt is imported from Japan to guarantee quality and long-lasting service. Krupp 430BA Stainless Steel blades, with huge air volume and high efficiency. No deformation, no dirt, stunning, durable. 304 2B Stainless Steel Blades can be modified to suit your needs. Die-casting creates belt pulleys and flanges made of high-strength aluminum alloys of aluminum and magnesium. They are light, have low vibration, robust and won't break. All parts are produced by CNC automated production, with high-quality assurance, stunning appearance leading the market. Yuyun Sanhe, Siemens, WEG, ABB and WEG motors are available. Variable Frequency and Voltage are available.
Our company has a state-of-the-art Feed Silo Production Equipment that is highly precisely controlled and highly automated. The silo is constructed from 275g/m2 light trap. All screws are made from 8.8-level high-strength hot-dip galvanized bolts that are corrosion-resistant, anti-oxidation, high-temperature resistance, high strength and long-lasting, and are able to withstand a severe storm. The silo consists of the silo, the silo lid, mounting ladder and silo leg. The components are made using high-quality molds, precision tools and laser technology in complete compliance with the drawing. They are then subjected to rigorous quality inspections in order to make them more consistent and accurate.
Sophie Dong
[email protected] 
+86-13780857291Lorna Gao [email protected] +86-19806216802
EN
AR
BG
DA
NL
FR
DE
EL
HI
IT
JA
KO
PL
PT
RO
RU
ES
SV
TL
ID
LV
LT
SR
UK
VI
HU
TH
TR
FA
MS
GA
AZ
BN
LA
MN
MY
KK
UZ
KY
